When using the sharpener, in order to ensure safe operation and correct use of the equipment, Vat-Power recommends that users pay attention to the following key points:
When placing the tool on the cutting table, it should be ensured that the extension length of the tool is appropriate, generally recommended to be 0.5 to 1.0 centimeters, and the extension amount at both ends needs to be consistent, which can be fine tuned by adjusting the top screw.
Before the tool is adsorbed onto the cutting table, it is necessary to ensure that the demagnetization switch of the electromagnetic device is turned on, so that the tool can be firmly adsorbed onto the cutting table.
Before grinding, carefully adjust the angle between the grinding wheel and the blade to ensure that both positions are correct. If the blade comes into contact with the grinding wheel, it should be adjusted by rotating the feed handwheel until the two separate.
Before starting up, be sure to check the power connection for safety, and then turn on the power switch to put the machine into normal working mode.
Operate the feed handwheel to slowly and evenly contact the blade with the grinding wheel, adjust the appropriate tightness, so that the grinding wheel and blade can work effectively together.
As a professional grinding machine manufacturer, Yangjiang Vat-Power Co., Ltd. provides various grinding equipment including CNC automatic single-sided grinding machines, CNC automatic vertical grinding machines, etc., serving multiple manufacturing fields such as hardware, knives and scissors, gardening tools, and automotive parts. For further product information or technical support, you can contact Vat-Power's customer service hotline.